HAAS HRT-210 VERTICAL & HORIZONTAL CNC ROTARY TABLE

HAAS HRT-210 VERTICAL & HORIZONTAL CNC ROTARY TABLE

Haas 210mm diameter CNC rotary table with motor SGM08 series Yaskawa servo motor and standard Haas interface cables, which is ready to plug and play to any suitable Haas machine (if you already have a 4th axis interface in the machine) Otherwise it will be necessary to request a standard 4th axis interface for this model from Haas.

Motor is mounted to the right side on this device and leaves the total through hole capability should you want to machine long bar components that need to be mounted through the centre hole of the table. If this device style may be an issue due to width of the unit, such as collision with machine doors with Y axis travel forward, you should look at rear mounted motor versions.

In selecting a side mount motor version you should consider the Y axis travel of the machine and if there would be any interference between the guard of the rotary table and the doors of the machine, particularly when referencing the machine as a lot of VMC machines reference with the Y axis travelling to the front of the machine, towards the operator.

This is an ideal design of product for any VMC machine, particularly those with a good working envelope. The usual collision issues only generally appear with the older DC motorised machines where the motors are much longer than the digital counterpart, in the case of Haas, the units are designed around their own machine range.

This device is ideal for the smaller VMC machine up to and including around 760 in X. Due to the carrying capacity however, if you have a larger VMC and are doing relatively light work you could mount this device on a raiser block and swing larger diameters than its standard design suggests.

Additional equipment available for this device would be a 160mm or 200mm 3 jaw chuck and backplate and matching tailstock.

Carrying capacity vertically unsupported 100kg or 200kg with matching tailstock.

Net weight 75kg

Through bore 50mm

Maximum speed 16.6 rpm

One only in stock, strictly subject to prior sale - contact technical sales for any further assistance. 

The model number relates directly to the faceplate diameter.

The Haas HRT models can be used in vertical and horizontal applications, the motor is mounted to the right side of the device and therefore can be laid on its back.

The Haas HRT-210 is a full contouring 4th axis device. Can be controlled directly from the machine tool control or via a separate programmable box via M signal start (not included).

All Haas products can be prepared to suit any machine interface and connection, regardless of machine make, model or control type. Please contact our technical sales team should you need further information.

This product comes with a 6 month warranty covering parts and labour.

Please note: This device can take 2 to 3 weeks to prepare for a specific interface.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



×
×
×
×
×
×
×
$(document).ready(function() { $('#slideshow').nivoSlider({ pauseTime:2000 }); });