CNC ROTARY TABLE 4TH AXIS

CNC ROTARY TABLE 4TH AXIS

CNC ROTARY TABLE 4TH AXIS

All rotary table devices are known as 4th axis tables, it is classified as a device that can rotate through 360 degrees bi-directionally being programmable to generally any of 360,000 positions (subject to control / encoder resolution). There are many different makes, models and types of table on the market, CNCROTARYSHOP.COM together with our sister site CNCROTARY.COM will guide you through the maze of product types and styles available, they can be very different to each other by way of performance although looking similar from the outside. These sites will assist you in making the right choice, technically and commercially to suit your own needs, budget and requirements.

HELP NOTES:

Rotary tables can be classified as a vertical rotary table, a horizontal rotary table or a vertical and horizontal rotary table, here are the clarifications:

Vertical rotary table:- A table that stands upright usually on a vertical machining centre with its centreline of axis in the horizontal plane.

Horizontal rotary table:- A table that lays on its back with its operating axis in the vertical plane.

Vertical & Horizontal:- A table ground on two faces to allow its use stood upright as a vertical device or laying on its back as a horizontal device.

For clarity, our shop items will all be described this way, without exception. If you require any technical assistance, please click on our chat icon for an immediate response during standard UK business hours.

Display: List Grid
Show:
Sort By:
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-507 is the smallest device in the range with a centre height of 110mm and a spindle nose of the 70mm which can accept a whole host of ..
£9,499.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-510 is probably the most popular device in the range with a centre height of 150mm and a spindle nose of 80mm which can accept a whole..
£8,895.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-510 is probably the most popular size of device in the range with a centre height of 150mm and a spindle nose of 80mm which can accept..
£10,995.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-511L is the high speed version of the EA-510 with a centre height of 150mm and a spindle nose of 80mm which can accept a whole host of..
£9,995.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-511 is the high speed version of the EA-510 model, still with a centre height of 150mm and a spindle nose of 80mm which can accept a w..
£12,995.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-520 is an ideal mid to large size VMC, drilling or tapping centre device with a centre height of 180mm and a spindle nose of around 13..
£13,250.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-520 is an ideal mid to large size VMC, drilling or tapping centre device with a centre height of 180mm and a spindle nose of around 13..
£15,995.00
The latest 500 range from Lehmann, with major developments over and above the 400 series devices. The Lehmann EA-530 is an ideal mid to large size VMC, drilling or tapping centre device or can be used on a range of large VMC or HMC machines due to..
£18,995.00
Nikken CNC rotary table 250mm diameter with motor to the rear to allow for full Y axis movement on Vertical Machining Centres. Supplied without motor in the first instance, can be prepared to suit any machine interface at extra cost. Carrying capacit..
£5,500.00 £7,995.00
The largest B type model from Nikken with motor mounted to the rear, with higher gear ratio over earlier models increases speed over the vertically mounted motor version type CNC-400V. This unit also has a hydraulic clamping system. The Nikken CNC..
£12,000.00
Pre-owned Nikken CNC-632 horizontal (vertical axis) CNC rotary table with 10 port coupling.  Fully refurbished to a high standard without servo motor or encoder in the first instance which can be added to suit any machine tool at additional c..
£7,997.50 £15,995.00
Peiseler AWUP-100 CNC Rotary table     A very high quality unused CNC rotary table manufactured by Peiseler of Germany. For use in the vertical position (horizontal axis) fitted with a pneumatic brake system and is offered in t..
£6,995.00
Fully re-furbished high quality vertical and horizontal Tsudakoma RN-150 device only. A superb quality contouring rotary table with high loading pneumatic clamping system.  The latest RN range from Tsudakoma, has major developments ..
£3,995.00 £5,995.00
The latest RNA range from Tsudakoma, with major developments over earlier models with major increases in speed and power transmission, with new high power pneumatic clamping system. The Tsudakoma RNA-161 is the smallest device in the RNA range wit..
The latest RNA range from Tsudakoma, with major developments over earlier models with major increases in speed and power transmission, with new high power pneumatic clamping system. The Tsudakoma RNA-201 is an ideal device for the smaller to mid s..
The latest RNA range from Tsudakoma, with major developments over earlier models with major increases in speed and power transmission, with new high power pneumatic clamping system. The Tsudakoma RNA-251 is an ideal device for the mid to larger VM..
×
×
×
×
×
×
×
$(document).ready(function() { $('#slideshow').nivoSlider({ pauseTime:2000 }); });