GSA CNCT-320 TILTING CNC ROTARY TABLE

GSA CNCT-320 TILTING CNC ROTARY TABLE

This GSA table, previously named Golden Sun is available as a pre-owned, quality rebuild device. It is sold with our standard one year parts and labour warranty and is certainly a superbly priced device. This is available as a one off only and subject to prior sale​.

The GSA CNCT-320 is a heavy duty medium size CNC rotary table tilting device, ideally suited to the larger VMC and HMC machines, with a faceplate diameter of 320mm.

The unit has a 30mm spindle bore directly through the table and a has a centre height of 255mm in the vertical position (90 degrees) and 350mm in the horizontal position (0 degrees) with faceplate.

This device is around 825mm in overall width subject to motor selection which suits a wide range of machine tool bed widths and an overall height of 425mm. The unit has a standard tilting range of -110 to + 110 degrees.

An excellent carrying capacity of 200kg through the whole tilting range and 100kg horizontally or between centres and speeds of up to 11.1rpm in the rotary axis and 11.1rpm in tilt dependent on motor selection. (Based on a 2,000rpm motor)

Net weight of this device is 450kg.

The GSA CNCT-320 CNC rotary tilting table without motors, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted).

Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, however with the general machine size that this would work with it is unlikely. The tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses.

This range of GSA devices come with dual lead worm and wheel, which means that backlash adjustment is simple.

GSA is a well known Taiwanese manufacturer and in our experience build a generally sound device with a very long service life.

This device may take from 2 to 3 weeks to configure as required.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



×
×
×
×
×
×
×
$(document).ready(function() { $('#slideshow').nivoSlider({ pauseTime:2000 }); });