NIKKEN 5AX-200 TILTING CNC ROTARY TABLE

NIKKEN 5AX-200 TILTING CNC ROTARY TABLE

A pre-owned unit that is fully refurbished to a very high standard.

The Nikken 5AX-200 is a medium duty mid-size CNC rotary table tilting device, ideally suited to medium VMC machines from around 800mm bed size in X upwards, with a faceplate diameter of 200mm faceplate.

The unit has a 50mm spindle bore directly through the table with a frontal location diameter of 60mm with a centre height of 180mm in the vertical position (90 degrees) and 260mm in the horizontal position (0 degrees) with faceplate.

This device is around 750mm in overall width subject to motor selection which suits a wide range of larger machine tool bed widths and an overall height of 295mm. The unit has a standard tilting range of zero to + 105 degrees.

An excellent carrying capacity of 50kg through the whole tilting range and 80kg horizontally or between centres and speeds of up to 22.2rpm in the rotary axis and 11.1rpm in tilt dependent on motor selection. (Based on a 2,000rpm motor)

Net weight of this device is around 210kg.

The Nikken 5AX-200 CNC rotary tilting table without motors, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted).

Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses.

This range of Nikken devices come with a carbide worm and specially treated hardened wheel, which means that backlash adjustments may be on an extended time frame to that of a device with say a bronze wormwheel.

Nikken is a leading class manufacturer from Japan and in our experience build a very fine device with a very long service life.

Nikken products sold by CNCROTARY.COM carry a standard one year parts and labour warranty.

This device may take from 2 to 3 weeks to configure as required

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



×
×
×
×
×
×
×
$(document).ready(function() { $('#slideshow').nivoSlider({ pauseTime:2000 }); });