Ganro 630mm diameter CNC rotary table without motor, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for external interface (motor, switch, cable and connector requirements if you already have a 4th axis interface in the machine) and machine interface costs (if you do not have the additional axis fitted).
Motor is mounted to the right side on this device and leaves the total through hole capability should you want to machine long bar components that need to be mounted through the centre hole of the table. Generally this device style would be mounted on a sufficiently large machine tool that there will not be an issue due to width of the unit, such as collision with machine doors with Y axis travel.
In selecting a side mount motor version you should always consider the Y axis travel of the machine and if there would be any interference between the guard of the rotary table and the doors of the machine, particularly when referencing the machine as a lot of VMC machines reference with the Y axis travelling to the front of the machine, towards the operator.
This is an ideal design of product for use with any machine tool, particularly those with a good working envelope. The design is versatile as it can used in either plane. Due to the carrying capacity however, if you have a larger machine tool and are doing lighter work you could mount this device on a raiser block and swing larger diameters than its standard design suggests.
Ganro products are a very high quality unit, incredible value for money and come with a 2 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.
Subject to the component accuracy, it is at this sort of diameter you should consider mounting direct axis encoders, which will provide guaranteed and consistent positional and repeatability accuracy over a number of years. Please check with our technical department if in your case, such an option may be required.
Standard accuracy is +/- 15 seconds of arc, repeatability (8 seconds bi-directional) 4 seconds of arc.
Additional equipment available for this device would be a 500mm or 630mm 3 or 4 jaw chuck and backplate and matching tailstock.
Carrying capacity vertically unsupported is 400kg and 1200kg with matching tailstock.
Net weight 830kg
If not in stock can be ordered on short lead time - contact technical sales.
The model number relates directly to the faceplate diameter.
The Ganro model type R can be used in vertical and horizontal applications, the motor is mounted to the right side of the device and therefore can be laid on its back.
The Ganro model type R is a full contouring 4th axis device. Can be controlled directly from the machine tool control or via a separate programmable box via M signal start.
All Ganro products can be prepared to suit any machine interface and connection, regardless of machine make, model or control type. Please contact our technical sales team should you need further information.
All Ganro products come with a 2 year warranty covering parts and labour.
Please note: This device can take 2 to 3 weeks to prepare for a specific interface.